The separator mainly consists of base, cantalever, hydraulic oil cylinder, motor ram, main axis suspension device, drum, upper volute and lower volute, etc.
Among which the base is the frame part of machine, base is composed of axis and pedestal’s connection. Lower shell and lifting oil cylinder cover is directly fixed to the base
Suspension branch is used to instal motor ram and axis cantalever part, upper volute is suspended on the suspension branch with three steeve. Suspension branch is connected to vertical axis part(on the pedestal) through ascending oil cylinder, the suspension branch can ascend driven by hydraulic pump station; when the suspension branch ascend to certain height, push it with hand, it will rotate according to oil cylinder’s axes.
Drum is composed of drum axis, disk rack, drum body, drum cover, seal ring, disk, refluence pipe, diffluence pipe and nozzle. The drum is connected to main axis through its big nut.
In the axis suspension facility, it is equipped with axis, bearing, etc. on the upper side of axis, it is equipped with triangle
strap. The axis suspension facility is equipped to the suspension branch. On the two sides of motor ram is rolling wheels, which make the ram move in the guide rail. On the upper side of suspension branch is spring tensioner, which used to regulate the tension power of triangle adhesive tape.
