HR Series Double Stage Centrifugal Filter Separator Ss304 2 Phase Decanter Centrifuge

Two phase or three phase decanter for centrifuge continuous separation of suspension containing density difference

Double Stage Pushing Centrifuge is a type of continuously operating filtering centrifuge, it has the advantages of automatic operating, continuous discharging, high capacity, low power,without peak load, fast drying, small pieces of grain, steady working, smallvibration intensity, etc.

2. Working principle
After drum reaching full speed, it can continuously send the material to feeding plate through feeding pipe. Because of the centripetal force, the material will be distributed uniformly along circumference to filter screen installed on drum, solid phase is hold back on the screen and forms ring-like filter cake. Solid phase will be pushed out from drum little by little according to the reciprocating motion of stage I drum, then discharged from
discharge spout on machine body.

3.Main parameters

4.Process and application
Double Stage Pushing Centrifuge is applied to separate the slurry which has middle-size crystal or fiber particle,average grading of solid phase 2 0.1mm,solid content (volume ratio) is 30-70%. If change feeding and distributing type,this machine can be also used to dry solid-phase material which is not diffluent, it has good washing effect and large capacity.
The machine is widely used for treating hundreds of materials like: Salt treatment of waste water (MVR), edible salt, kalium chloratum, ammonium chloride, ammonium sulfate (flue desulfuration), urotropin, ox bone particle(gelatin), sodium sulfate, chlorine and alkali industry, nitrocotton, cotton seeds, glyphosate, etc.

5.Our company